Leica-biosystems CV5030 User Manual download pdf (Page 18)

Instructions for Use V 3.0 RevE – 04/2013

4.1 Installation site requirements (continued)

4. Instrument Setup

• TheinstrumentoperatorhastoensurethatESDsafetyprecautionsaremaintained.

• Theinstrumentoperatorisobligatedtoconformtothelocalworkplacelimitvaluesandtodocument

them.

Furthermore, the instrument operator must ensure that there is sufficient air exchange and the

active carbon filter is changed at the recommended interval.

The instrument operator bears responsibility for complying with workplace limits and the measures

necessary for this, including documentation.

4.2 Unpacking the CV5030

Fig. A

Opening the package (Fig. A)

• Unscrewthe8screws(Fig. A, 2) on the sides

of the wooden box and loosen the cover.

• Carefullyliftthecoverfromthewoodenbox.

When the instrument is delivered, check the tilt indicators on the pack-

aging. If the arrowhead is blue, the shipment was transported laying

flat, was tilted at too great an angle or fell over during transport.

Note this on the shipping documents and check the shipment for

possible damage.

Only personnel authorized by Leica may unpack and install the instrument.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 111 112

No comments

Leica-biosystems CV5030 User Manual Page 18