Leica-biosystems IPS User Manual download pdf (Page 31)

Leica IP S

4. Instrument Setup

• Thecontactspring(44) has to touch the igni-

tion wire (45) of the lamp after being inserted.

• Swingthereflectordownwards.Reinsertand

retighten screw (49).

• Closelid(4) of the instrument again.

Fig. 20

4547

Inserting the new flash bulb

Fig. 22

Fig. 19

Fig. 21

Caution!

If the lamp electrodes are inserted the

wrong way, the flash bulb will still

work, but the lifetime will be signifi-

cantly reduced.

• Inserttheshieldingglass(85) in the two hold-

ers (86).

• Insert thenewflash bulbintosocket(46)

(Fig. 21); then push it carefully inwards as far

as it will go (Fig. 22) (the polarity marker (+)

must not be visible any longer). If necessary,

move flash bulb gently up and down.

• Important!Makesurethatthenewflashbulb

is inserted correctly – the lamp electrode

(47) marked with a + must be inserted into

the socket (46) that bears the same mark (48)

(Fig. 21).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 69 70

No comments

Leica-biosystems IPS User Manual Page 31