Leica-biosystems IPS User Manual download pdf (Page 60)

Instructions for Use V 1.9 RevD - 05/2013

6. Cleaning and Maintenance

Transporting the printer

If the printer is to be shipped, the storage instructions described above

are to be carried out completely. Then, additionally make the following

preparations:

• Openthehood(4, Fig. 31) of the printer and loosen the screw of the flash

cover.

• Afterward, take out the flash bulb (refer to Chapter 4.7)

• Closetheflashcoverandthehood.

• Useoriginalpackagingandsecurelyscrewtheprintertothebaseplate

(see unpacking instructions).

• Reinsert the transport anchor (27) (see Fig. 12) and secure the hood with

adhesive tape.

• Make sure that the instrument is only transported upright.

• Likewise,cleantheremovedremovabledisk

(70) with the sealing lip with (clean) alcohol

and a cleaning swab (89) (Fig. 62).

• Thesealinglip(71) must be completely free

of ink residue. Check the sealing lip for dam-

age. Do not reuse a replacement plate with a

damaged sealing lip.

• Cleantheinstrumentcompletely,asdescribed

in Chap. 6.1.

Instructions for storage (continued)

Fig. 62

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 69 70

No comments

Leica-biosystems IPS User Manual Page 60